Standard Horizon PS2000 Bedienungsanleitung Seite 31

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 72
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 30
Page 31Phantom PS2000
10.14 NAVIGATION INDICATION
The transceiver has the ability to display the time and your vessel position (LAT/
LOG), when connected to a GPS receiver.
1. Press the
[
NAV
]
key momentarily, display “time,” “latitude,” and “longitude”
informations alternately every
two seconds. If the GPS re-
ceiver is not receiving a fix, the
display will be shown “NO POS
notation in the LCD.
2. To hide the navigation information, press the
[
NAV
]
key again.
You may display the COG (Course Over Ground) data in the
LCD instead of your vessel position (LAT/LOG) by the Radio
Setup Mode, refer to section “12.5 CHANGING GPS INFOR-
MATION TO VESSEL POSITION OR COF.”
10.15 INTERCOM OPERATION
If you connect the two CMP25 RAM+ Microphone to the Phantom PS2000,
you may communicate between the both CMP25 RAM+ Microphones.
10.15.1 Communication
1. Press and hold down the
[
DW
(
IC
)]
key until the channel
number is changed to “IC” notation. ThePhantom PS2000
is changed to “INTERCOM” mode from the “Radio” opera-
tion mode.
2. Press the PTT switch. “TALK” will be shown on the display.
NOTE: A warning beep will be emitted when the PTT switch
is pressed while the “LISTEN” notation is appeared.
3. Speak slowly and clearly into the microphone, hold the mi-
crophone about 1/2 inch away from your mouth.
4. When finished, release the PTT switch.
5. To exit the “INTERCOM” mode and return to “Radio” opera-
tion mode, press the
[
DW
(
IC
)]
key again.
10.16.2 Calling
Press and hold the
[
DW
(
IC
)]
key for one second when the “INTERCOM” opera-
tion is activated, a calling beep is emitted twice from the transceiver speaker.
(
Time
) (
Longitude
)
(
No GPS Signal
)
(
Latitude
)
Seitenansicht 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 71 72

Kommentare zu diesen Handbüchern

Keine Kommentare