Standard Horizon Hx500s Bedienungsanleitung PDF herunterladen (Seite 13)

HX500S Page 11

4.1.4 USING THE CD-35 CHARGER CRADLE

1. Turn the transceiver off.

2. Insert the DC plug from the NC-90 into the DC jack on the CD-35 side

panel, then plug the NC-90 into the AC line outlet.

3. Insert the HX500S (with the battery pack) into the CD-35; the antenna

should be at the left side when viewing the charger from the front.

4. If the HX500S is inserted correctly, the Red indicator on the CD-35 will

glow. A fully-discharged pack will be charged completely in approximately

8 hours.

Important Note:

Do not leave the charger connected to the transceiver for continuous

periods in excess of 24 hours. Long term overcharging can degrade the

Lithium-Ion battery pack and significantly shorten its useful life.

5. When charging is completed, disconnect the pack from the CD-35, and

unplug the NC-90 from the AC line outlet.

4.1.5 MOUNTING THE CD-35 ON THE VESSEL

The CD-35 is designed to be surface on a vessel which can be connected to

the charger.

If mounting on a vessel, the CD-35 must be mounted in a location on the

vessel that is directly shielded from rain or splashes of water. After the loca-

tion is found, mount the CD-35 using the supplied mounting screws.

CD-35 Desktop Mount

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Keine Kommentare

Standard Horizon Hx500s Bedienungsanleitung Seite 13